Recent Changes

Friday, August 10

  1. msg The code changes message posted The code changes Both connections means the Serial and the RS485 serial.
    The code changes
    Both connections means the Serial and the RS485 serial.
    10:18 am
  2. msg The code changes message posted The code changes By building the actual circuit using cheap RS485 bricks and two MicroPro I discover that: 1. Both …
    The code changes
    By building the actual circuit using cheap RS485 bricks and two MicroPro I discover that:
    1. Both connections needs to run at same Baud Rate (9600) in order to get good response from the remote unit.
    2. The 10ms delay included before setting the Master to receive mode makes to loose bytes from remote unit. After taking it out of the code makes the response more reliable.

    Still appreciate the all the work done in this WIKI. Thansk.
    10:16 am

Wednesday, August 1

  1. 6:14 pm
  2. page HOME edited NOTE! This site will NOT go away! It will be rebuilt before "wikispaces" ends its servi…

    NOTE! This site will NOT go away! It will be rebuilt before "wikispaces" ends its service.
    Preview New Site: https://arduinoinfo.mywikis.net/wiki/HOME (Comments, suggestions, volunteers welcome!)
    Welcome to the Arduino-info Wiki! (You do not need to be a member to read it!) There are MANY, MANY subjects on this site. Use the SEARCH on upper right!
    {RoboRed-Annotated-900E16.jpg}
    (view changes)
    4:44 am

Wednesday, July 25

  1. page Bluetooth HM-10 edited ... Technical Specifications Operating Voltage: 3.6V to 6V ... level: 3.3V (Version shown abo…
    ...
    Technical Specifications
    Operating Voltage: 3.6V to 6V
    ...
    level: 3.3V (Version shown above has level-shifting chip and I/O voltage level = 5.0V)
    Bluetooth Standard: V4.0 BLE (Bluetooth Low Energy)
    Working frequency: 2.4GHz ISM band
    (view changes)
    4:57 am

Monday, July 23

  1. 10:18 am
  2. 10:18 am

More